Skip to main content
English
Emergency vehicles

Power management for ambulances and emergency vehicles

Power distribution, multiplexed control and battery management for blue-light builds, engineered and assembled in the UK by Intellitec MV.

Last updated:

The short answer

What is power management for an emergency vehicle?

Emergency vehicle power management shares battery power between the lighting, medical or rescue equipment, radios and screens a response vehicle carries, protects each circuit and keeps the starter battery alive at a scene. Intellitec MV, part of the Scorpion Group, designs and assembles these power systems in the UK.

Speak to us about vehicle power

Key facts

  • Power distribution modules replace banks of relays and fuses with controlled, monitored digital switching.
  • Multiplexed wiring and control run over a network instead of a heavy loom.
  • Battery management, DC-DC conversion and load shedding protect the starter battery.
  • Made in the UK by Intellitec MV in Bromborough, Wirral, to ISO 9001 and ISO 14001, with Vehicle Certification Agency (VCA) Conformity of Production accreditation.
  • Applications: emergency, bus and coach, leisure and marine.

What does an emergency vehicle power system do?

An emergency vehicle carries far more electrical load than a standard van, and it has to be dependable every shift.

Emergency vehicle power needs and what Intellitec MV provides
NeedWhat Intellitec MV providesWhy it matters
Many added loads Power distribution modules that switch and protect loads digitallyOne monitored module replaces a board of relays and a row of fuses.
Complex wiring Multiplexed wiring and control over a networkA lighter, tidier loom that is easier to fault-find and repeat across a fleet.
Engine-off running Battery management and DC-DC conversionAuxiliary equipment keeps working while the starter battery is protected.
Protecting the battery Load shedding and monitoringNon-essential loads drop out before the vehicle fails to start.
Logic between loads Outputs that follow inputs and vehicle stateScene lighting only with the park brake set, for example.

Source: Intellitec MV power solutions and our guides to power distribution modules and multiplexed wiring.

Why do ambulances and response vehicles need more than relays?

  • Heavy loads: lighting, sirens, radios, medical or rescue equipment, screens and heating all draw power.
  • Loads that depend on each other: interlocks tied to the park brake, doors or ignition are configured, not hand-wired.
  • Repeat builds: a fleet or production run should be wired identically, and a configured module makes that practical.
  • Dependability: a fault should show up as information, so crews and workshops find it fast.

Power and security at the scene

Where Scorpion VHF+ finders fit

  • Plan, not coverage: a prototype is working in the field. No force or operator has been announced.
  • Built in: the finder joins the power system the vehicle already needs, fitted during conversion.
  • Not a pursuit role: a finder records a beacon contact and the control room decides what happens next with police.

Go deeper on Intellitec MV

130,000+ active customers
50+ years, since 1973
24/7 support
UK designed, built & fitted
FAQs

Frequently asked questions

What is power management in an ambulance?

It is the system that shares battery power between the lighting, medical equipment, radios and screens a vehicle carries, protects each circuit and keeps the starter battery alive at a scene. Intellitec MV builds power distribution, multiplexed control and battery management for emergency vehicles in the UK.

Who makes power management for emergency vehicles in the UK?

Intellitec MV, part of the Scorpion Group, designs and assembles electronic power systems for emergency, bus and coach, leisure and marine vehicles in Bromborough, Wirral. It works to ISO 9001 and ISO 14001 with Vehicle Certification Agency (VCA) Conformity of Production accreditation.

What does a power distribution module do?

It switches and protects electrical loads electronically, replacing banks of relays and fuses with one controlled, monitored unit. It also reports what each circuit is doing, so a fault shows up as information.

Why use multiplexed wiring on an emergency vehicle?

Multiplexing sends control commands over a data network instead of a dedicated wire per switch. The loom gets lighter and changes become configuration rather than rewiring. It pays off on builds with long equipment lists.

Can engines run with the key out at an emergency scene?

UK regulations allow it for fire, police and ambulance purposes, among other exemptions. A runlock system keeps the vehicle secure while it runs and cuts the engine if someone tries to drive off.

Will emergency vehicles carry Scorpion VHF+ finders?

That is the plan, built on Intellitec hardware. A prototype is working in the field, but no emergency service has signed up yet, so it is a plan and not coverage.

Talk to us about vehicle power

Tell us the vehicle and the electrical loads it carries, and we'll point you to the right power system across the group.