Specifying power management for emergency vehicles
A specifier's guide to the electrical decisions on a police, fire or ambulance build: what to put in the brief, what to ask a supplier and how to check the answers.
Sam P., R&D Technician at Scorpion Automotive. Reviewed by James M., Technical Director at Scorpion Automotive.
What should an emergency vehicle power specification cover?
List every load with its current and priority, then decide how each is switched, protected and shed. Specify engine-off running, battery monitoring and fault reporting, and require the supplier to show how the configuration is saved and repeated across a fleet. The base vehicle's CAN network sets the limits.
Speak to us about vehicle power
Key facts
- Intellitec MV supplies power management systems for police, fire and ambulance vehicles in the UK
- It designs and assembles them in Bromborough, Wirral
- The site is certified to ISO 9001 and ISO 14001, with Vehicle Certification Agency Conformity of Production accreditation
- Controller, keypad and battery guard detail is on the police vehicle power page
The specification, line by line
Write the brief around the decisions below. Each row names what to define and what a good answer from a supplier looks like.
| Item | What to define | What a supplier should show |
|---|---|---|
| Load list | Every circuit with its current, duty cycle and priority | How each load is switched and which are fused or protected electronically |
| Switching method | Relays and fuses, or a power distribution module | Where the logic lives and how it is changed without rewiring |
| Control and wiring | Conventional loom, or multiplexed control over a network | Loom weight, fault-finding method and how a build is repeated |
| Load shedding | Which loads drop first when voltage falls | Priority settings you can read and edit, and the voltage thresholds used |
| Battery protection | How the starter battery is kept able to start the vehicle | Auxiliary battery arrangement, split charging and isolation |
| Engine-off running | Scene time with the engine idling or stopped | How the vehicle is kept secure while it runs, and what cuts the engine if someone drives off |
| Vehicle integration | Which signals are read from the base vehicle | CAN connection to ignition, speed, park brake and doors, without cutting the factory loom |
| Fault reporting | What a crew or workshop sees when a circuit trips | Which output tripped, and a data log a workshop can read |
| Approvals and quality | Quality certificates and any vehicle approval relevant to the build | Certificates in date, and the vehicle approval route for the finished conversion |
Intellitec MV's own equipment is described on the police vehicle power management and emergency vehicle power management pages.
A tender checklist for the electrical sub-system
Use these as pass or fail lines in an invitation to tender, or as questions at a supplier meeting.
-
Has the load list been signed off by the user?
Crews add equipment during a vehicle's life. Ask for spare capacity on the controller and say how much you expect to need.
-
Can the supplier prove it can repeat a build?
One saved configuration applied to every vehicle in a batch is the aim. Ask how the configuration is stored, versioned and checked.
-
What happens to the starter battery at a long scene?
Ask for the shedding order and the voltage at which each load drops, then check that the vehicle still starts.
-
How does the system talk to the base vehicle?
Ask which signals it reads over CAN, and whether it works with the exact base vehicle and model year you are buying.
-
How are faults shown and logged?
A tripped output should be identified at the controller or keypad, with a log the workshop can download.
-
Who assembles and certifies the equipment?
Ask where it is made, which quality standards the site holds and for copies of the certificates.
-
What documentation arrives with the vehicle?
Ask for wiring diagrams, configuration files and a fault-finding guide, in a format the fleet workshop can use.
-
Who supports it after handover?
Ask for the support route and the commitment on spare parts for the life of the build.
Police, fire, ambulance and electric builds
The same principles apply across blue-light vehicles, but the weight of each differs.
- Police cars: compact bodies, many loads and long standing time. The Intellitec iConnex Response controller handles 4 CAN buses, 1 LIN bus and 16 configurable inputs, and takes a supply from 9V to 32V.
- Ambulances: medical equipment, radios and heating run for long periods, so battery management and engine-off power carry the most weight.
- Fire and rescue: scene lighting and equipment loads often follow vehicle state, such as the park brake being set.
- Electric response vehicles: there is no engine to idle, so the 12V draw must be controlled and the controller must read vehicle state over CAN.
Frequently asked questions
What is power management on a blue-light vehicle?
It is the control of every added electrical load: switching, protecting, prioritising and shedding them so the equipment works and the vehicle still starts. A controller does it in place of banks of relays and fuses.
Do I need multiplexing, or will relays do?
A short equipment list can work with relays. A long list, repeat builds and fault finding all favour a configured controller, because changes become settings rather than rewiring.
How do I stop long scenes flattening the starter battery?
Specify an auxiliary battery, split charging and a load-shedding order, and ask for the voltage at which each load drops. Test it with the real equipment list switched on.
Which standards should the brief reference?
Start with your own ambulance trust or force specification and the national ambulance specification, then ask the supplier to list the standards its equipment and site are certified to. Check the current versions yourself.
Who supplies power management for UK emergency vehicles?
Intellitec MV, part of the Scorpion Group, supplies power management systems for police, fire and ambulance vehicles in the UK, designed and assembled in Bromborough, Wirral.
Sources
- NHS England: Double-crewed ambulance (DCA) national specification, version 2 (opens in a new tab) (accessed 10 October 2026)
- NHS England: National specification for base vehicle and conversion (B0356, October 2021) (opens in a new tab) (accessed 10 October 2026)
- Intellitec MV: electronic power solutions for specialist vehicles (opens in a new tab) (accessed 10 October 2026)
Related pages
- Police vehicle power management Controllers, keypads and battery protection for police conversions.
- Emergency vehicle power management Ambulance and rescue vehicle power systems.
- Power solutions What the group builds for specialist vehicles.
- CAN bus integration Signals and systems off the vehicle network.
Preparing a specification or a tender?
Send us the base vehicle and the equipment list, and we will point you to the right Intellitec MV controller, keypads and battery protection.