Police vehicle power management and blue light electrics
Controllers, keypads, battery protection and plug-and-play harnesses for police car conversions, designed and made in the UK by Intellitec MV.
Last updated:
What is police vehicle power management?
It is the electrical backbone of a converted police car: one controller that switches beacons, sirens and equipment, sheds load to protect the battery and keeps systems running at a scene. Intellitec MV, part of the Scorpion Group, supplies power management systems for police, fire and ambulance vehicles in the UK.
Speak to us about police vehicle electrics
Key facts
- One controller sits between the base vehicle's CAN network and the blue light equipment.
- Battery protection keeps the starter battery able to start the car after a long scene.
- Repeatable builds arrive as assembled, plug-and-play harnesses.
- Made in the UK in Bromborough, Wirral, to ISO 9001 and ISO 14001:2015, with Vehicle Certification Agency Conformity of Production (COP) accreditation.
- Specialist vehicle power has been Intellitec's engineering focus since 1994.
What do police car electrical systems have to do?
A marked or unmarked response car starts life as a normal production vehicle, then takes on a long list of extra electrical duties.
| Job | Intellitec MV hardware | Benefit to the fleet |
|---|---|---|
| Control lights, sirens and equipment | iConnex Response controller with integrated siren amplifier | One unit replaces separate relay boxes and a standalone amplifier. |
| Operate from the cab | iConnex keypads in 3, 4 and 6-way versions, rated IP66 | Crews get clear switching that matches the build specification. |
| Idle, charge and lock the engine | iPLC (K192) controller | Idle management, autostart, run-lock, split charging and safety interlocks in one device. |
| Protect the starter battery | Battery Guards: BG10, BG18, BG250, BG2000 and BG3000 | Auxiliary loads can't flatten the battery the car needs to start. |
| Supply the right voltage | DC-DC converters | Equipment that needs a different rail is fed cleanly. |
| Warn people nearby | Speech warning systems: IVA401, IVA402 and i-Talk | Spoken warnings sit alongside the siren tones. |
| Wire the same car every time | Assembled harness solutions delivered plug-and-play | Fitting time falls and every vehicle in the batch matches. |
Source: Intellitec MV. Specifications are for the products named. For help choosing between them, speak to us.
How do blue light vehicle conversion electrics work?
Good conversion electrics follow a few principles, whatever the base car.
- Load shedding: when battery voltage sags, the controller drops low-priority loads first, so the lights and radio stay up.
- Siren and light interlocks: rules such as 'work lights only with the handbrake on' live in configuration, not in a tangle of relays.
- Auxiliary battery and split charging: a second battery feeds the equipment while the alternator tops up both, and the starter battery stays isolated.
- Fault diagnosis: the controller reports which output tripped, and USB data logging gives the workshop a record to read.
- Repeatable fleet builds: one saved configuration is applied to every car in a batch, so a fault found on one is understood on all.
A police build is the opposite of a one-off special. A converter may fit dozens of identical cars, so wiring that can be repeated and checked matters more than clever individual tricks.
What can the iConnex Response controller handle?
iConnex Response is the Intellitec controller for UK blue-light vehicles, including electric ones.
- Networks: 4 CAN buses and 1 LIN bus.
- Inputs: 16 configurable inputs.
- Outputs: 24 at 2A, 12 at 10A and 4 at 30A, plus 12 telematics outputs.
- Supply range: 9V to 32V.
- Siren amplifier: integrated Type D, as 1x200W or 2x100W, with 20 tones.
- Logging: USB data logging for service and diagnosis.
The iPLC (K192) is a separate controller aimed at the engine-running side of a build. It handles idle management and autostart, run-lock, split charging and safety interlocks. The Battery Guard range sits behind it: the BG250, for example, is rated 250A and auto-detects 12V or 24V systems.
Running at a scene, and on electric response cars
The hard part of police vehicle electrics isn't driving. It is standing still with every system on.
At a scene the engine may idle for hours to keep lights, radios and cameras alive. A run-lock system lets that happen with the key out and the car locked, then cuts the engine if someone tries to drive off. See the CAN bus runlock system, and the beacon and work-light control page for low-current triggering of lighting.
Electric response cars change the sums. With no engine to idle, the equipment draws from the traction battery through the car's 12V system, so the 12V draw has to be managed and the controller has to speak to the vehicle over CAN. iConnex Response is specified for blue-light EVs for that reason.
Where Scorpion VHF+ finders fit
Scorpion plans to fit VHF+ finders into emergency service vehicles that carry Intellitec power hardware.
- A plan, not a deployment: this describes intent for vehicles built on Intellitec hardware, not current use by any force.
- Why Intellitec: the finder can draw on the power system already installed during conversion.
- The evidence so far: a Freedom of Information request found 177 of 9,557 police vehicles (1.85%) across 15 forces had VHF detection kit.
Read the UK police VHF readiness report for the full figures, or start at the Scorpion VHF+ hub.
Go deeper on Intellitec MV
Intellitec MV is a Scorpion Group company in Bromborough, Wirral, 100% designed and manufactured in the UK.
Frequently asked questions
What is police vehicle power management?
It is the control and protection of a police car's added electrical load. A central controller switches beacons, sirens and equipment, sheds low-priority loads when voltage drops and keeps the starter battery able to start the car.
How are police car electrics different from a normal car?
A production car expects modest loads and an engine that is moving. A converted police car adds high-current lighting, an amplifier, radios and data equipment, and may stand with the engine idling. That needs its own switching, fusing and battery protection.
What does a blue light vehicle conversion involve electrically?
The converter fits a controller, keypads, a siren amplifier, battery protection and a harness, then configures interlocks and load priorities. An assembled plug-and-play harness cuts fitting time and keeps every car in a batch identical.
Who supplies power management for UK police vehicles?
Intellitec MV, part of the Scorpion Group, supplies power management systems for police, fire and ambulance vehicles in the UK. It designs and manufactures in Bromborough, Wirral, and holds ISO 9001, ISO 14001:2015 and Vehicle Certification Agency COP accreditation.
How do electric police cars manage their equipment load?
The equipment runs from the car's 12V system, which the traction battery feeds, so the draw has to be controlled. A CAN-connected controller such as iConnex Response can monitor vehicle state and shed load, and it is specified for UK blue-light EVs.
Will police vehicles carry Scorpion VHF+ finders?
That is the plan for emergency vehicles built on Intellitec hardware, not a statement of current use. A Freedom of Information request found 177 of 9,557 police vehicles (1.85%) across 15 forces had VHF detection kit.
More on specialist vehicle electronics
- Power solutions Electronic power systems for specialist vehicles.
- Emergency vehicle power Ambulance and rescue vehicle power management.
- Runlock system Engine-running security at the scene.
- Beacon and work-light control CAN-triggered lighting control.
- Scorpion VHF+ The recovery network and its roadmap.
- UK police VHF readiness report FOI figures on VHF detection kit.
- Specifier's guide What to put in an emergency vehicle power specification.
Talk to us about police vehicle electrics
Tell us the base vehicle and the equipment list, and we'll point you to the right Intellitec controller, keypads and battery protection.