What Is a Micro Relay? Automotive Micro Relays Explained
By Alec J. Reviewed byJames M.
A micro relay is a compact automotive relay: a small coil-operated switch that lets a low-current signal control a higher-current circuit, in a smaller body than a standard plug-in relay. Automotive micro relays are used where space is tight, in modern fuse boxes, compact modules and aftermarket installs behind trim.
Key facts:
- Same job, smaller body: a micro relay switches a load from a small control signal, like any relay.
- Same logic: coil terminals plus a normally open contact, and a normally closed one on changeover types.
- Lower ratings: a smaller body generally means a lower contact current rating, so check it against the load.
- Packaging matters: sealed and waterproof versions suit wet or exposed locations.
- Check the case diagram: pin layouts vary between relay types and makers.
What does a micro relay do?
Exactly what a full-size relay does. A switch, alarm output or CAN interface energises the coil with a small current. The coil moves a contact, and the contact carries the heavier current to the load.
The reason to use a relay at all is to keep heavy current away from delicate switches and electronics. The reason to use a micro relay is space. Vehicle electrical centres have become crowded as cars have gained functions, and a smaller relay lets more circuits fit in the same box.
If you need a refresher on pin numbering and the difference between switching and changeover types, our guide to 4 pin vs 5 pin relays covers the terminals one by one.
Micro relay vs mini relay: what is the difference?
Automotive relays come in families of plug-in sizes. The full-size plug-in relay most installers picture is often called a mini relay. A micro relay is the next size down.
| Standard (mini) plug-in relay | Micro relay | |
|---|---|---|
| Body size | Larger | Smaller |
| Typical home | Older fuse boxes, aftermarket relay holders | Modern fuse boxes, compact modules, tight installs |
| Contact rating | Generally higher | Generally lower, check the label |
| Switching types | 4 pin make, 5 pin changeover | Make and changeover versions |
| Interchangeable? | Only with the same base | Only with the same base |
The two are not plug-compatible. A micro relay needs a micro relay base or holder, and the rating of any replacement should match the original.
Where are micro relays used in a vehicle?
Modern cars and vans use them throughout the electrical centres for functions that don’t need a large contact rating. On the aftermarket side, installers use them wherever a full-size relay won’t fit neatly.
Common uses:
- Fuse box relays on many modern vehicles, alongside larger relays for heavy loads.
- Lighting circuits, such as auxiliary lamps triggered from an existing feed.
- Accessory switching, powering add-on electronics only when the ignition is on.
- Security installs, where a relay is part of an alarm or immobiliser circuit and needs to sit out of sight.
- Signal conditioning, turning a module’s low-current output into a clean switched feed.
On a CAN vehicle, the trigger often comes from an interface rather than a factory wire. An ignition and accessory output gives the switched signal from the vehicle network, and a relay then carries the load.
What should you check before fitting a micro relay?
A small relay is easy to fit. Fitting the right one takes a minute of checking.
- Coil voltage. Match it to the vehicle: 12V on a car or van, 24V on most trucks.
- Contact rating. It must cover the load current with margin. Lamps and motors draw more at switch-on than when running.
- Contact type. Make (normally open) or changeover, depending on whether you need the normally closed side.
- Suppression. Some automotive relays include a diode inside the case to absorb the voltage spike when the coil switches off (Relay). That protects the electronics driving the coil, but it gives the coil a fixed polarity.
- Environment. Under the bonnet, in a wheel arch or on a chassis rail, a sealed or waterproof relay is the better choice.
- Fusing. Fuse the load circuit at the supply, sized to the cable.
Are waterproof micro relays worth it?
For anything outside the cabin, usually yes. Water and road salt get into exposed connections, corrode the terminals and cause intermittent faults that are slow to trace.
A sealed relay keeps moisture away from the contacts and coil. It matters most on vans, trucks and plant, where relays end up on chassis rails or bodywork rather than inside a dry fuse box. Inside the cabin, a standard relay in a secure holder is normally fine.
Scorpion’s 5-pin Micro relay
Scorpion makes vehicle electronics in the UK, and our own relay came out of the jobs installers do every day. The 5-pin Micro relay is a compact, waterproof relay module that you can use in place of a traditional 5-pin relay in most automotive applications.
It sits alongside our CAN interfaces and security products in the vehicle hardware range, so the signal, the switching and the security on an install can come from one manufacturer.
Talk to us about relay supply
Ordering relays for a fleet rollout or a production build? Our UK team will talk you through the options and supply.
- Speak to us about volumes and applications
- 5-pin Micro relay for the compact waterproof option
Frequently Asked Questions
What is a micro relay in a car?
A micro relay is a compact plug-in relay that lets a small control current switch a larger circuit. Modern cars use them in fuse boxes and electrical centres where space is tight, and installers use them for aftermarket lighting, accessories and security.
Can I replace a micro relay with a mini relay?
Not directly. Micro and mini relays have different bases, so they don’t plug into the same socket. Replace a micro relay with one of the same type, coil voltage, contact arrangement and current rating.
Is a micro relay less powerful than a standard relay?
Smaller relays generally have lower contact ratings than full-size ones, though ratings vary by model. Always check the relay’s printed rating against the load current, allowing for the higher current lamps and motors draw at switch-on.
Do micro relays come in 5 pin versions?
Yes. Like standard relays, micro relays come as make-only types with a normally open contact and changeover types that add a normally closed contact. Check the diagram on the case before wiring.
Where should I use a waterproof relay?
Anywhere a relay is exposed to water, spray or road salt: under the bonnet, on a chassis rail, on bodywork or on plant. Sealing keeps moisture away from the contacts and coil, which prevents corrosion and intermittent faults.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- relays
- vehicle electronics
- installers
- auto electrics
Alec J.
Software Engineer at Scorpion Automotive
Alec J., a Software Engineer at Scorpion Automotive in Chorley, covers CAN bus, vehicle electronics and electric vehicles.
Reviewed by James M., Technical Director at Scorpion Automotive