Scorpion Automotive 5-pin relay
A compact, waterproof “Micro” relay module that replaces a traditional 5-pin relay in most automotive use cases.
What is the Scorpion 5-pin relay?
It is a compact, waterproof “Micro” relay module from Scorpion Automotive. As a 5-pin changeover relay it switches one feed between two outputs, 87 and 87a. It replaces a traditional 5-pin relay in most automotive uses. Pricing is through dealers, or speak to us.
Small relay, standard job
Installers reach for a 5-pin relay when a circuit has to change over rather than just switch on. The Scorpion Micro version does that job in a smaller body that is built for damp locations.
- Compact “Micro” relay module
- Waterproof
- Five-pin changeover switching on terminals 30, 85, 86, 87 and 87a
- Goes where a traditional 5-pin relay would go in most automotive applications
Working on a bigger integration? See our CAN-Bus interfaces and vehicle hardware.
Specification at a glance
Only values we can stand behind are listed. Ask us for anything missing before you specify the part.
| Item | Detail |
|---|---|
| Product | Scorpion Automotive 5-pin Micro relay module |
| Type | Five-pin changeover relay: one common contact, one normally open and one normally closed output |
| Terminals | 30, 85, 86, 87 and 87a |
| Construction | Compact Micro body, waterproof |
| Intended use | Replaces a traditional 5-pin relay in most automotive applications |
| Manufacturer | Scorpion Automotive Ltd, Chorley, UK |
Coil voltage, contact current rating, IP rating and dimensions are not published on this page. Confirm them with our team, and with the markings on the relay you hold, before you fit.
Where installers use a 5-pin relay
The extra 87a terminal is what earns the fifth pin. These are the jobs it suits.
- Immobiliser and alarm circuits that must stay complete until a trigger breaks them
- Swapping one feed between two lamps, horns or indicators so only one is live
- Fail-safe logic, where a circuit keeps running until a signal tells it to stop
- Accessory power switched from an ignition or CAN bus output instead of a hard-wired live
- Any spot where a bulky relay and base will not fit behind the trim
How the five pins work
Terminal numbers follow the DIN 72552 convention used across automotive relays. The diagram printed on the relay case always takes priority.
- 85 and 86: the coil. A small current here moves the contact.
- 30: the common contact, fed from a fused supply.
- 87: the normally open output, live only while the coil is energised.
- 87a: the normally closed output, live only while the coil is off.
Wiring it safely
- Fuse the pin 30 feed close to the source, sized to the cable and the load.
- Run the switched load from pin 87, or from 87a if it should stay on until triggered.
- Connect the coil across 85 and 86 and match any polarity marked on the case.
- Check the coil voltage against the vehicle supply before you power anything.
- Leave 87a unconnected if you only need an on switch. The relay then behaves like a 4-pin relay.
Testing a relay with a multimeter
A two-minute bench test separates a good relay from a doubtful one. Do it with the relay out of the vehicle.
- Set the meter to ohms and measure across 85 and 86. You should read a resistance. An open circuit means a broken coil.
- With the coil unpowered, test continuity from 30 to 87a. It should beep, while 30 to 87 should stay open.
- Power the coil with a fused supply of the correct voltage. You should hear it click.
- Test again with the coil energised. Now 30 to 87 should be continuous and 30 to 87a open.
- If the relay has a built-in suppression diode, wire the coil the right way round or the test will mislead you.
Request a call back
Fill in the form with your business name and contact details, and one of our experts will be in touch soon.
5-pin relay questions
What is the Scorpion 5-pin relay?
A compact, waterproof “Micro” relay module from Scorpion Automotive. You can use it in place of a traditional 5-pin relay in most automotive use cases.
How do I buy the 5-pin relay and what does it cost?
We don't quote a price on this page. Pricing is through dealers, or you can fill in the form here and a member of the team will call you back with current terms.
What is the difference between a 4 pin and a 5 pin relay?
A 4 pin relay has one normally open contact, so it only switches a circuit on. A 5 pin relay adds pin 87a, a normally closed output: pin 30 connects to 87a while the coil is off and to 87 when it is energised. That lets one relay swap a feed between two circuits or cut a circuit when triggered.
What is pin 87a for?
It is the output that stays connected to the common pin 30 while the coil is unpowered. Use it for anything that should run by default and drop out when the relay is triggered.
What can I use a 5-pin relay for?
Typical jobs are immobiliser circuits, changeover switching between two lamps, horns or signals, and fail-safe logic that keeps something running unless a signal tells it to stop. Which circuit to interrupt depends on the product's own fitting instructions. Wired without pin 87a, a 5-pin relay behaves exactly like a 4 pin relay.
How do I test a 5-pin relay?
Measure the coil across 85 and 86, then check continuity from 30 to 87a with the coil off and from 30 to 87 with the coil powered. Both contacts should change over cleanly and the coil should click.
Should I fuse a relay circuit?
Yes. Fit a fuse in the supply to pin 30, close to the battery or distribution point, rated for the cable and the load. The relay switches the current but does not protect the wiring.
Is the relay waterproof, and what is its IP rating?
Scorpion describes it as a waterproof Micro relay module. We have not published an IP rating, so ask the team for the figure if your install needs one.
What should I check before fitting a micro relay?
Match the coil voltage to the vehicle, 12V on a car or van and 24V on most trucks, and check the contact rating against the load, because a smaller body generally means a lower rating. Read the diagram printed on the relay case too, since pin layouts vary between relay types and makers.
Related products and guides
- Alarms and immobilisers: The security products a relay-switched circuit often supports.
- Ignition and accessory output: A CAN bus signal that can trigger the relay coil.
- CAN bus interfaces: Reading vehicle signals without tapping the loom.
- Vehicle hardware: The full Scorpion hardware range.
- Speak to us: Ask for current terms and the missing specification values.
Sources
Product facts come from Scorpion Automotive. General relay behaviour is from these references.