IP Ratings for Automotive Electronics Explained
By Alec J. Reviewed byJames M.
An IP rating in automotive electronics is a two-digit code that grades how well a device’s enclosure keeps out solid objects, including dust, and water. The higher each digit, the harsher the test it has passed, which tells you where in a vehicle the part can safely live.
Key facts:
- Defined by IEC 60529, “Degrees of protection provided by enclosures (IP Code)”, whose current consolidated edition dates from August 2013.
- First digit: protection against solid objects, from 0 (no protection) to 6 (no ingress of dust).
- Second digit: protection against liquids, from 0 (no protection) to 9 (high-pressure hot water from different angles).
- Vehicle alarm regulation UN R116 asks for IP 40 in the cabin and IP 54 for parts fitted elsewhere.
- Not a vibration or temperature rating: those are tested separately.
What does an IP rating mean?
IP stands for ingress protection. The IEC created the code so that a word like “waterproof” means something testable rather than a marketing claim (IEC).
The code is two numerals after the letters IP:
- The first rates protection against solid objects, from 0 for no protection up to 6, where no dust gets in.
- The second rates protection against liquids, from 0 for none up to 9, which covers high-pressure hot water sprayed from different angles.
Each level corresponds to a defined test in IEC 60529. The IEC’s own summary is for information only and points to the standard for the full test conditions (IEC 60529).
So a datasheet that says IP67 is making a specific claim about both dust and water, each backed by a test. A datasheet that just says “sealed” isn’t.
What IP rating do vehicle electronics need?
It depends on where the part is mounted. A vehicle isn’t one environment. It’s several, and they differ a lot.
The clearest public benchmark comes from UN Regulation No 116, which sets approval rules for vehicle alarm systems. It requires these degrees of protection, by reference to the IEC standard (R116, OJ L 45):
| Mounting location | R116 minimum | R116 temperature class |
|---|---|---|
| Passenger compartment | IP 40 | minus 40°C to plus 85°C |
| Cabin of a convertible or car with a removable roof panel, where the location needs more | IP 42 | minus 40°C to plus 85°C |
| All other parts, including the engine bay | IP 54 | up to plus 125°C in the engine bay unless otherwise specified |
The regulation also makes the alarm maker state any restrictions on where parts can go with respect to dust, water and temperature. That’s a useful habit for any product: the installation instructions should tell you where it can’t live.
Why do the cabin and the engine bay differ?
Inside the cabin, a control unit behind the dashboard sees dust, occasional condensation and the odd spilt drink. It rarely sees direct spray.
Outside it, conditions change:
- Engine bay: heat, road spray, pressure washing, oil mist and salt in winter.
- Chassis and wheel arches: standing water, grit and direct jets from the road.
- Load areas and bodies: on commercial vehicles, wash-down and exposure when doors stay open.
That’s why a relay or module that’s fine behind the glovebox can fail within a winter on a chassis rail. The enclosure might keep water out for a while, but a cable entry or connector without a seal lets it wick inside.
How should you read IP ratings on a datasheet?
Treat the code as a starting point, then check the detail.
- Look for both digits. An “X” in place of a digit means that property wasn’t rated, not that it scored well.
- Check the whole assembly. A housing can be rated while its connector isn’t. Ask whether the rating applies with the mating connector fitted.
- Match the location. Use the mounting table above as a sanity check for the place you’re fitting.
- Ask about temperature and vibration. IP ratings don’t cover them. Vehicle parts need separate evidence for heat, cold and vibration.
- Follow the fitting instructions. Mounting orientation, drip loops and grommets often decide whether the rating holds in service.
On commercial vehicles that run on 24V, check the voltage rating too; our guide to 12V and 24V vehicle electrics covers why.
What protects electronics beyond the enclosure?
An enclosure is the first line of defence. The circuit board inside can be protected as well.
Conformal coating is a thin protective layer applied over a populated circuit board. It helps the board resist moisture and contamination that does get past the housing. Scorpion’s Chorley facility uses automated conformal coating and automatic optical inspection on its production line, alongside SMT and THT assembly, which is part of why Scorpion builds electronics for vehicle makers as well as the aftermarket.
Good design adds more: sealed connectors, potting where it suits the product, and thought about where condensation will collect.
Scorpion enclosures and the ratings behind them
Small components are where ingress causes the most frustrating faults. Our 5-pin Micro relay is a compact, waterproof relay module that replaces a traditional 5-pin relay in most automotive uses. For more on choosing relays, see our guide to micro relays.
For bespoke electronics, our engineering team specifies the enclosure, connectors and coating for the location the product will live in, then builds it in the UK.
Talk to us about ratings for your enclosure
Fitting electronics somewhere exposed, or specifying a product for a harsh location? Talk to our technical team.
- Speak to us about protection for your application
- 5-pin Micro relay for a waterproof switching option
Frequently Asked Questions
What does the IP code stand for?
IP stands for ingress protection. The code, defined by IEC 60529, uses two numerals: the first grades protection against solid objects and dust from 0 to 6, and the second grades protection against liquids from 0 to 9.
What IP rating does a car alarm need?
Under UN Regulation No 116, alarm parts fitted in the passenger compartment need IP 40, those in a convertible’s cabin may need IP 42 where the location demands it, and all other parts, including the engine bay, need IP 54.
What does the X in IPX mean?
An X stands in for a digit that hasn’t been rated. A product marked with X for the first digit has only a water rating, so you can’t assume anything about dust protection. Ask the supplier if the missing property matters for your fit.
Is an IP rating the same as being waterproof?
Not exactly. “Waterproof” isn’t a defined term, while each IP level relates to a specific IEC 60529 test. A high second digit shows the enclosure passed a demanding water test, but check whether the rating includes the connector.
Does an IP rating cover heat and vibration?
No. IP ratings only cover the ingress of solids and liquids. Vehicle electronics also need evidence of temperature performance and vibration resistance, which are tested separately against vehicle standards and the manufacturer’s own specifications.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- vehicle electronics
- IP ratings
- installers
- relays
Alec J.
Software Engineer at Scorpion Automotive
Alec J., a Software Engineer at Scorpion Automotive in Chorley, covers CAN bus, vehicle electronics and electric vehicles.
Reviewed by James M., Technical Director at Scorpion Automotive