Skip to main content
English
CAN Bus and Vehicle Electronics

Who Makes CANM8 Interfaces? Where They Are Built

4 min read

By Alec J. Reviewed byJames M.

Who Makes CANM8 Interfaces: Scorpion Automotive guide illustration with a CAN bus circuit board icon

Scorpion Automotive’s Chorley electronics facility manufactures CANM8 interfaces; CAN KONTROL, the Intellitec MV range, is made in the same factory.

Key facts:

  • Maker: CANM8 interfaces are manufactured at the Scorpion Automotive facility in Chorley, UK.
  • CAN KONTROL: the Intellitec MV range is made in the same factory.
  • Process at the Chorley factory: surface mount (SMT), through hole (THT), conformal coating and automatic optical inspection (AOI) are all done in-house.
  • The difference: CAN KONTROL is configured to your exact vehicle by the group’s own engineers and backed by Intellitec MV support.

Who makes CANM8 interfaces?

If you searched for a CANM8 manufacturer, the short version is that the electronics are built by Scorpion Automotive at its Chorley facility. Scorpion has made vehicle electronics since 1973 and has been based in Chorley since 2005.

CAN KONTROL, the Intellitec MV range, is made in the same factory.

What does an electronics manufacturing facility actually do?

An electronics manufacturing services (EMS) facility turns a design into working units, repeatably and at volume. At Chorley that covers four main steps:

  1. Surface mount (SMT): small components are placed on the circuit board by machine and soldered in a controlled oven.
  2. Through hole (THT): larger parts such as connectors and relays are fitted and soldered.
  3. Conformal coating: a protective film goes over the board, so moisture, vibration and temperature swings in a vehicle do not shorten its life.
  4. Automatic optical inspection (AOI): cameras check every board for missing, misplaced or badly soldered parts before it moves on.

Prototype builds and volume production both run through the same process, which is why a one-off bespoke unit and a production run can be held to the same standard. You can read more about the in-house capability on our bespoke electronics page.

What does the Chorley factory mean for a buyer?

For CAN KONTROL it means the build, inspection and support all sit with the Scorpion Group in the UK. Where an interface is bought from is a separate question from how it is specified, configured and supported, and that is where CAN KONTROL is set up differently: each line is matched to the buyer’s vehicle.

How is CAN KONTROL configured to the vehicle?

CAN KONTROL works as one module family with function-named lines, such as SPEED, CAMERA, PARK FRONT or POWER. Each line is programmed for the vehicle it goes into: you tell us the make, model and year, the equipment the interface will feed and the voltage, and the group’s own engineers confirm what the line will do on that vehicle before anything is made.

That configuration is backed by Intellitec MV, the Scorpion Group company that makes the range, so questions about a signal, a fitting or a firmware change go to the people who work on the hardware. The i2CAN platform behind it runs on 12V and 24V, and a no-cut inductive reader is available where the loom should stay untouched. For the full product-by-product match, see the CANM8 alternative cross-reference.

How do you get the right interface for your vehicle?

  1. Collect the details: vehicle make, model and year, the equipment you are adding and the signals it needs, such as speed, reverse, ignition or park brake.
  2. Pick your route: for trade and installer enquiries, speak to us. For CAN KONTROL datasheets and a direct CAN enquiry, use the Intellitec MV contact page.
  3. Confirm before you order: we confirm the line and the vehicle fit first, so you are not guessing from a part number.

If you are still working out which signals your job needs, our CAN bus integration hub explains each function in plain language, and the interface modules manufacturer guide covers how to specify a module.

Frequently Asked Questions

Who manufactures CANM8 interfaces?

Scorpion Automotive’s Chorley electronics facility manufactures them. CAN KONTROL, the Intellitec MV range, is made in the same factory.

Where are CANM8 interfaces made?

They are manufactured at the Scorpion Automotive electronics facility in Chorley, UK. The site runs SMT, THT, conformal coating and AOI in-house.

What is the CAN KONTROL equivalent to a CANM8 product?

CAN KONTROL is made in Chorley by Intellitec MV. Each line is configured to your exact vehicle by the group’s own engineers. The alternative page matches product names line by line.

How do I order a CAN KONTROL interface?

Send the vehicle make, model and year plus the equipment and signals you need. Trade customers can use our speak to us page, and CAN enquiries can go straight to Intellitec MV.

Speak to our team

Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.

View all products →
Tags:
  • CANM8
  • CAN KONTROL
  • CAN bus
  • manufacturing
  • Chorley
Scorpion Automotive

Alec J.

Software Engineer at Scorpion Automotive

Alec J., a Software Engineer at Scorpion Automotive in Chorley, covers CAN bus, vehicle electronics and electric vehicles.

Reviewed by James M., Technical Director at Scorpion Automotive