Direct Vision Standard: What London HGV Operators Fit and Why
By Alec J. Reviewed byJames M.
The Direct Vision Standard (DVS) rates how much an HGV driver can see directly through the cab windows, from zero to five stars. Since 28 October 2024, lorries over 12 tonnes need three stars to get a London safety permit, or must fit the Progressive Safe System of cameras, sensors and warnings.
Key facts:
- Scope: HGVs over 12 tonnes gross vehicle weight entering or operating in Greater London need a valid safety permit.
- Minimum rating: raised from one star to three stars on 28 October 2024.
- Below three stars: zero, one and two-star or unrated lorries must fit the Progressive Safe System (PSS).
- Permits: free to apply for, and the scheme runs 24 hours a day, every day.
- Penalty: a Penalty Charge Notice of up to £550 for operating without a valid permit.
What is the Direct Vision Standard?
DVS is Transport for London’s measure of direct vision from an HGV cab. It looks at what the driver can see through the windows, without mirrors or cameras, and expresses it as a star rating that’s fixed when the vehicle is built.
The rating feeds the HGV Safety Permit Scheme, which covers most of Greater London. According to TfL’s operator guidance, the scheme started with a one-star minimum in 2021. Since 28 October 2024 the threshold for a permit without extra equipment has been three stars, and lower-rated vehicles need the PSS.
Vehicle manufacturers hold the star ratings for their models. Operators with zero, one or two-star lorries can self-certify that rating without manufacturer proof, TfL says.
What does the Progressive Safe System require?
TfL lists seven items. Every one of them has to be fitted to a zero, one or two-star lorry before it can get a permit.
- Camera monitoring system on the nearside, to completely eliminate the remaining nearside blind spot.
- Class V and VI mirrors, or a camera system that replaces them, at the nearside and front, fitted in line with UNECE Regulation 46.
- Blind spot information system (BSIS) with active sensors down the nearside. A vehicle that demonstrably complies with UNECE Regulation 151 meets this.
- Moving off information system (MOIS) with front sensors. Compliance with UNECE Regulation 159 meets this.
- Side under-run protection on both sides unless demonstrably impractical, to UNECE Regulation 73.
- Audible manoeuvring warning to people outside when the vehicle turns left.
- External warning signage on the rear of the vehicle or trailer, at least A3.
The guidance adds detail that matters at install time. Monitors for low-speed blind spot views may switch off above 20mph. The audible warning should measure between 65 and 88 dB(A) at one metre, and TfL suggests a manual off switch for use between 23:30 and 07:00.
How do cameras and sensors know when to switch on?
This is where vehicle electronics come in. Most PSS kit needs to know what the lorry is doing.
| PSS item | What it needs to know | Typical vehicle signal |
|---|---|---|
| Left-turn audible warning | Driver intends to turn left | Left indicator |
| Nearside camera view | Turning or manoeuvring | Indicator, reverse, low road speed |
| Monitor switch-off above 20mph | Road speed | Vehicle speed |
| MOIS | Vehicle is stationary and about to move off | Speed, park brake, gear state |
| Reversing camera and alarm | Reverse selected | Reverse signal |
On a modern truck, most of those signals travel as messages on the vehicle network rather than on a dedicated wire. If you’re new to that, our guide to what CAN bus is explains why.
Tapping into a heavy-vehicle loom to find an indicator feed is slow and can cause faults. A commercial vehicle interface reads speed, reverse, indicator and status messages off the truck’s network instead and provides clean outputs to trigger side-scan cameras, audible warnings and body equipment. For the rear view, a reverse camera interface does the same job for the reverse signal.
What evidence does TfL ask for?
For zero, one and two-star or unrated lorries, TfL’s guidance asks for two things with the permit application:
- Two photographs: front and nearside in one, rear and nearside in the other, with the number plate readable in both.
- A sensor functionality statement: confirming the blind spot and moving off systems are fitted to TfL’s technical specifications and working.
TfL doesn’t require third-party certification for the equipment. For vehicles type-approved to UNECE Regulations 151 and 159, it accepts manufacturers’ type-approval certificates, subject to conditions. For other vehicles the statement should come from the fitter or the equipment manufacturer.
That puts weight on the installer. The sensors and cameras need to work, and the person signing the statement needs to be confident they do. Always check the current requirements with TfL before applying, as the scheme is reviewed.
Scorpion equipment for DVS compliance
Scorpion designs and manufactures CAN electronics in the UK. Our CAN bus integration range includes interfaces built for commercial vehicles, reading the signals that camera-monitor systems, sensors and audible warnings depend on across the common UK truck and van fleet.
Our group company Intellitec MV builds power and control systems for buses, emergency vehicles and other specialist builds, so larger conversion projects can be engineered with power and signals together.
Talk to us about DVS equipment for your HGVs
Fitting PSS equipment across a London fleet? Tell us the trucks and the systems, and our engineers will confirm a clean way to take the signals off the network.
- Speak to us about your vehicles and the kit you’re fitting
- Commercial vehicle interface for HGV signal takeoffs
Frequently Asked Questions
What star rating do HGVs need for London?
Since 28 October 2024, HGVs over 12 tonnes need a Direct Vision Standard rating of three stars or above to get a London safety permit without extra equipment. Zero, one and two-star or unrated lorries must fit the Progressive Safe System first.
What is the Progressive Safe System?
It is TfL’s set of safety measures for lorries rated below three stars: a nearside camera monitoring system, Class V and VI mirrors or camera replacements, blind spot and moving off sensors, side under-run protection, a left-turn audible warning and rear warning signage.
Does the HGV safety permit cost anything?
No. TfL says applying for a permit is free of charge. Operating an HGV over 12 tonnes in Greater London without a valid permit can lead to a Penalty Charge Notice of up to £550.
How do DVS cameras and alarms get their trigger signals?
They need signals such as the left indicator, reverse and road speed. On modern trucks these are usually messages on the CAN bus, so a commercial vehicle CAN interface can read them and provide clean outputs without cutting into the loom.
Do three-star lorries need any safety equipment for London?
The three-star threshold is for the permit itself. Fleet schemes, contracts and site rules can ask for more, so check what your customers and any accreditation require, and confirm the current permit rules with TfL.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- Direct Vision Standard
- HGV safety
- London
- commercial vehicles
Alec J.
Software Engineer at Scorpion Automotive
Alec J., a Software Engineer at Scorpion Automotive in Chorley, covers CAN bus, vehicle electronics and electric vehicles.
Reviewed by James M., Technical Director at Scorpion Automotive