Aftermarket Electronics on EVs: Protecting the 12V Battery
By Sam P. Reviewed byJames M.
EV 12V battery drain happens when the small auxiliary battery in an electric car runs flat, often because something keeps drawing power while the car is parked. Even with a large traction battery, an EV needs its 12V battery to wake up, so badly fitted aftermarket electronics can leave it unable to start.
Key facts:
- Every EV has a 12V battery for control units, lights, locks and other low-voltage systems.
- It wakes the car: when an EV is parked the high-voltage battery is disconnected for safety, and start-up is initiated by the 12V battery.
- A DC-DC converter turns high-voltage power into 12V to supply the vehicle’s low-voltage systems.
- A common breakdown cause: the AA has named the 12V battery as one of the top two causes of EV breakdowns.
- Unauthorised devices connected to the battery can discharge it, according to manufacturer manuals.
Why does an electric car still have a 12V battery?
Because most of the car still runs at 12V. Locks, lights, wipers, infotainment, sensors and the control units that manage the drivetrain all use a low-voltage network.
VARTA explains that even purely electric vehicles need a 12V battery to function. When the car is parked, the high-voltage battery is disconnected for safety, and starting it up again is initiated by the 12V battery (VARTA).
So a flat 12V battery has a strange effect. The traction battery can be full, and the car still won’t wake up.
How is the 12V battery charged in an EV?
There’s no alternator. Instead, a DC-DC converter takes power from the high-voltage battery and steps it down to 12V.
Kia’s EV6 manual, for example, describes a component that converts power from the high-voltage battery to low voltage to supply the vehicle, and a 12V auxiliary battery that powers features such as lights and wipers (Kia).
How and when that top-up happens varies by make and model. For an installer, the safe assumption is simple: a parked EV is living on its 12V battery, and anything you add draws from it.
Why do aftermarket electronics drain the 12V battery?
Every device that stays powered when the car is parked takes a little current. Over days, a little adds up.
The usual causes are:
- Always-on supplies. A device wired to a permanent live keeps running when the car is asleep.
- Keeping the network awake. Some devices disturb the vehicle’s data network, so modules that should sleep stay on.
- Poor connections. Splices and taps into the factory loom can cause faults, and some create small leaks.
- Stacking devices. A dashcam, a tracker and an accessory controller can each be fine alone and too much together.
Manufacturers warn about this directly. Kia’s manual says that connecting unauthorised electronic devices to the battery may discharge it.
The AA has reported that the low-voltage 12V battery was one of the top two causes of electric vehicle breakdowns it attended (The AA).
How do you fit kit to an EV without flattening the battery?
Plan the power before you fit anything.
| Question | What good looks like |
|---|---|
| What does the device draw when parked? | A stated sleep or standby figure from the supplier |
| Does it need to run when parked? | If not, switch it with the vehicle |
| How does it connect to the vehicle? | Through an interface, not splices into data wires |
| Does it keep the network awake? | It should let the vehicle sleep normally |
| How many devices share the battery? | Add up the parked draw of everything fitted |
Some products need permanent power, such as a tracker or an immobiliser that must work when the car is parked. For those, the supplier’s parked draw is the number to ask for.
Accessories that don’t need to run when parked should follow the vehicle. An ignition and accessory output takes a switched supply from the network, so add-on electronics power up and shut down with the car. Our CAN bus integration range provides other signals the same way, without cutting into the loom.
What should EV owners and fleet managers ask installers?
You don’t need to be an engineer. A few questions show whether the installer has thought about the 12V battery.
- Which supply will this use, permanent or switched?
- What does it draw when the car is parked?
- How does it connect to the vehicle network?
- What happens if the car is left for two or three weeks?
For fleets with vehicles parked for long spells, add a check of 12V health to routine servicing.
How Scorpion connects to an EV’s low-voltage system
Scorpion designs CAN bus electronics in the UK that read the vehicle’s own network rather than cutting into it. Our electric vehicle security page covers immobiliser and tracking options for EVs, and our guide to the electric vehicle immobiliser explains how a PIN-based CAN immobiliser protects an electric car from relay and key-clone theft.
If you’re fitting to a specific EV, our technical team can talk you through the connection and power options for that vehicle.
Talk to us about connecting to an EV 12V system
Fitting security or accessories to electric vehicles? Ask us about the right connection for the vehicle.
- Speak to us about EV installations
- Electric vehicle security for immobiliser and tracking options
Frequently Asked Questions
Why does my electric car have a 12V battery?
Most of an EV’s systems, including locks, lights, sensors and control units, run at 12V. When the car is parked the high-voltage battery is disconnected for safety, and the 12V battery is what wakes the car up again.
Can a flat 12V battery stop an EV starting?
Yes. If the 12V battery is flat, the car may not power up even with a fully charged traction battery, because the 12V system initiates start-up. The AA has named the 12V battery as one of the top two causes of EV breakdowns.
Can a tracker drain an EV’s 12V battery?
Any device that stays powered while the car is parked draws from the 12V battery. A well-designed tracker has a low parked draw. Ask the supplier for the figure, and make sure it’s fitted to the right supply and connected cleanly.
How is the 12V battery charged in an electric car?
There’s no alternator. A DC-DC converter takes power from the high-voltage battery and steps it down to 12V to supply the vehicle’s low-voltage systems. When and how it tops up the 12V battery varies between makes and models.
How do I stop accessories draining my EV battery?
Power accessories that don’t need to run when parked from a switched supply that follows the vehicle, such as a CAN ignition output. Avoid splicing into data wires, and add up the parked draw of every device fitted.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- electric vehicles
- 12V battery
- installers
- vehicle electronics
Sam P.
R&D Technician at Scorpion Automotive
Sam P. works as an R&D Technician at Scorpion Automotive in Chorley, covering commercial and specialist vehicles, trade partners, and fitting and vehicle electrics.
Reviewed by James M., Technical Director at Scorpion Automotive