Skip to main content
English
Thatcham and Insurance

Thatcham Category 2 Immobiliser Explained

6 min read

By Ian D. Reviewed byJames M.

Thatcham Category 2 Immobiliser Explained: Scorpion Automotive guide illustration with an immobiliser key icon

A Thatcham Category 2 immobiliser is an electronic immobiliser on its own, with no alarm, that has passed Thatcham’s Category 2 tests. It must cut at least two separate vehicle circuits and set itself automatically, so the driver doesn’t have to remember. Insurers name Category 2 when they want the drive-away stopped but don’t insist on an alarm.

Key facts:

  • Immobiliser only: no siren, no intrusion sensors.
  • Two circuits minimum: a thief has to defeat more than one cut.
  • Passive setting: it arms without the driver doing anything.
  • Factory fit: new cars have needed an immobiliser since 1998, but that doesn’t make every one Thatcham Category 2.
  • Upgrade path: add a Category 2-1 alarm and the vehicle reaches Category 1.

What is a Thatcham Category 2 immobiliser?

It’s the immobiliser-only category in Thatcham’s scheme. A Category 2 device must limit at least two separate circuits of the car and must not require the driver to take action to set it (Motoring Research).

That second rule matters. An immobiliser that relies on the driver pressing a button every time will, sooner or later, be left off. Passive arming closes that gap.

Category 1 is the same idea with a full alarm added. Our page on Thatcham Category 1 vs Category 2 explains how insurers read the two.

How does an immobiliser stop a car being driven?

An immobiliser sits between the ignition and the parts the engine needs to run. Until it gets the right authorisation, it keeps those circuits cut or blocked.

  1. You switch off and leave the vehicle.
  2. The immobiliser arms itself.
  3. Someone tries to start the engine.
  4. Without valid authorisation, at least two circuits stay disabled and the engine won’t run.
  5. With the correct key, tag or code, the circuits are restored and the car starts.

What counts as “valid authorisation” is where immobilisers differ. A factory system usually trusts the transponder in the key. An aftermarket immobiliser may ask for something extra, such as a PIN or a separate tag.

Does my factory immobiliser count as Category 2?

New cars have been fitted with immobilisers for a long time. Under Directive 95/56/EC, every new passenger car registered in the EU, including the UK at the time, needed one from 1 October 1998 (EUR-Lex).

Whether that factory system is a Thatcham Category 2 immobiliser is a separate question. Some vehicles have factory security assessed against Thatcham’s requirements, others don’t. Check the handbook or ask a franchised dealer.

This is why the wording on your policy matters:

  • “Immobiliser fitted” may be satisfied by the factory system.
  • “Thatcham Category 2 immobiliser” needs a product or factory system that holds that category.
  • “Thatcham Category 1” needs an alarm as well, either a full system or a Category 2-1 upgrade on a qualifying base.

Category 2 vs Category 1 vs Category 2-1

CategoryImmobiliserAlarmTypical use
Category 2YesNoInsurer wants the drive-away stopped, no alarm required
Category 2-1Uses the existing Category 2YesAdds the alarm to reach Category 1
Category 1YesYesFull alarm and immobiliser, often on higher-value vehicles

If an insurer has asked for Category 1, start with our guide to the Thatcham Category 1 alarm, which covers both routes.

Why does an immobiliser still matter on modern cars?

Because theft hasn’t gone away. UK insurers paid out £178 million for theft of and from vehicles in the third quarter of 2023, up 35% on the same quarter a year before, according to the Association of British Insurers (ABI).

Many of those thefts beat the factory system rather than ignore it. Keyless relay attacks trick the car into thinking its key is nearby. Key programming attacks add a new key through the diagnostic port (Thatcham Research). In both cases the factory immobiliser sees what looks like a genuine key.

An aftermarket immobiliser that asks for a second, independent proof stops that. Our guide to how a CAN immobiliser stops keyless theft explains the method.

Where does the Scorpion X-Series fit?

The Scorpion X-Series is a CAN bus immobiliser. It arms automatically as soon as the ignition is switched off. To start the vehicle, the driver enters a custom PIN using the car’s own buttons, or carries a paired ScorpionTrack S5 driver tag.

That PIN or tag is the second proof a relayed or cloned key can’t supply. The X-Series is not Thatcham categorised, so if your insurer names a category, check the wording before you rely on it. Our What is Thatcham? guide lists the categories in full.

When a low-loader beats the immobiliser

A Category 2 immobiliser stops the engine starting, but not a vehicle being lifted onto a lorry. If that happens, recovery depends on tracking, and the Scorpion VHF+ Recovery Network is being built as a radio back-up to it. It doesn’t replace the device your insurer specifies.

Check your immobiliser against the policy wording

Not sure whether your factory immobiliser meets your insurer’s wording? Send us the vehicle and the policy condition.

Frequently Asked Questions

What does Thatcham Category 2 mean?

It means an electronic immobiliser, without an alarm, that has passed Thatcham’s Category 2 testing. It must disable at least two separate circuits and arm itself automatically, so the vehicle is protected without the driver having to remember.

Is a factory immobiliser Thatcham Category 2?

Not automatically. All new cars in the UK have needed an immobiliser since 1998, but only some factory systems are assessed to a Thatcham category. Check the handbook or ask a franchised dealer what your vehicle’s security is rated.

What is the difference between a Category 2 immobiliser and a Category 1 alarm?

Category 2 stops the engine starting. Category 1 does that and adds an alarm with intrusion sensors, a siren and a back-up power supply. Adding a Category 2-1 alarm to a qualifying Category 2 immobiliser gives Category 1 status.

Does a Category 2 immobiliser stop keyless theft?

Not on its own if it trusts the car’s key. Relay and key programming attacks make the car think a genuine key is present. An immobiliser that also needs a PIN or separate tag adds a check those attacks can’t pass.

Do I need a Category 2 immobiliser for insurance?

Only if your insurer asks for one. Read the policy wording: some ask for any immobiliser, some name a Thatcham category, and some want Category 1 instead. If the wording is unclear, ask the insurer to confirm in writing.

Speak to our team

Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.

View all products →
Tags:
  • Thatcham
  • immobilisers
  • insurance
  • keyless theft
Scorpion Automotive

Ian D.

Head of R&D at Scorpion Automotive

Ian D. is Head of R&D at Scorpion Automotive in Chorley and writes about Thatcham, insurance and OEM engineering.

Reviewed by James M., Technical Director at Scorpion Automotive