Thatcham Category 1 Alarm: What It Includes and Who Needs One
By Ian D. Reviewed byJames M.
A Thatcham Category 1 alarm is a combined alarm and electronic immobiliser that has passed Thatcham’s Category 1 tests. It needs intrusion sensors, a back-up power supply and a siren, alongside an immobiliser that stops the engine starting. Insurers ask for Category 1 on higher-value and higher-risk vehicles, where an immobiliser alone isn’t enough.
The short version:
- Two jobs in one: a Category 1 system both detects a break-in and stops the drive-away.
- Sensors, siren, back-up power: the alarm side has to keep working if the battery lead is cut.
- Two routes: fit a complete Category 1 system, or add a Category 2-1 alarm to a factory immobiliser.
- Insurer driven: you usually need one because a policy says so.
- Paperwork matters: keep proof of what was fitted and when.
What is a Thatcham Category 1 alarm?
It’s the fullest of Thatcham’s alarm and immobiliser categories. A Category 1 device includes both an electronic immobiliser and an integrated alarm, and the alarm needs sensors to detect movement or broken glass, a backup power supply and a siren (Motoring Research).
Compare that with Category 2, which is the immobiliser on its own. Category 1 adds the part that makes noise and draws attention. Our explainer on Thatcham Category 1 vs Category 2 sets the two side by side.
What does a Category 1 system include?
Think of it as two systems wired to work as one.
The alarm side:
- Perimeter detection on the doors, bonnet and boot.
- Interior sensing, usually ultrasonic, to catch someone reaching in through a broken window.
- A siren that sounds when the alarm triggers.
- A back-up power supply, so cutting the vehicle battery doesn’t silence it.
The immobiliser side:
- Electronic immobilisation that prevents the engine starting without authorisation.
- Automatic setting, so protection doesn’t depend on the driver remembering.
Every product has to pass Thatcham’s Category 1 testing to carry the name. A system with the same parts that hasn’t been tested isn’t Category 1, however good it is.
Who needs a Category 1 alarm?
Mostly, people whose insurer has asked for one. It’s the condition that turns a Category 1 alarm from a choice into a requirement.
It tends to come up on:
- prestige and performance cars
- models with a high theft rate
- motorhomes and campervans
If your policy names Category 1, read the condition closely. It may also say who must fit the system, or ask for a certificate. Our guide to the full list of Thatcham categories helps decode the rest of the schedule.
Can I reach Category 1 without replacing my immobiliser?
Usually, yes. Since 1 October 1998, new cars registered in the EU and UK have needed an immobiliser fitted as standard under Directive 95/56/EC (EUR-Lex). That factory immobiliser does the Category 2 job on many vehicles.
Add a Thatcham Category 2-1 alarm on top and the car reaches Category 1 status. This is the common route on modern cars, because it works with the original system rather than around it.
| Your vehicle | Route to Category 1 | Scorpion option |
|---|---|---|
| Older or unusual vehicle, no suitable immobiliser | A complete Category 1 alarm immobiliser | S30 |
| Modern car using its original remote | Category 2-1 plip upgrade alarm | S32 |
| Motorhome or van wanting extra remotes | Category 2-1 upgrade with additional radio keys | S34 |
| CAN bus vehicle, motorhome lockers to protect | Category 2-1 CAN bus upgrade with wireless sensor support | S37 |
Check with the installer before you buy. Whether a factory immobiliser counts as the Category 2 base depends on the vehicle.
Which Scorpion alarm is Category 1?
The S30 in the S-Series is a Thatcham Category 1 remote alarm immobiliser. It gives perimeter and ultrasonic interior protection and comes with a keypad programmer and override.
The S32, S34 and S37 are Thatcham Category 2-1 upgrades. Fitted to a vehicle with a qualifying Category 2 immobiliser, each brings it up to Category 1 status. The S34 and S37 suit motorhomes, and the S37 adds a built-in receiver for wireless PIR sensors in habitation areas and lockers.
Is a Category 1 alarm enough on a keyless car?
It covers break-ins well. Keyless theft is different.
In a relay attack, the car believes its own key is present, so a plip upgrade alarm that follows the car’s locking can treat the theft as normal use. On a keyless car, pair the alarm with an immobiliser that needs something the thief can’t relay, such as a PIN or a driver tag. Our What is Thatcham? guide shows how alarm, immobiliser and tracking categories fit together.
If an alarmed car is taken anyway
Category 1 is about stopping the theft. For a car that is stolen regardless, the Scorpion VHF+ Recovery Network is being built to help searchers pin down a hidden vehicle once GPS has brought them close. What a VHF tracker is covers the basics.
Talk to us about a Category 1 requirement
Has your insurer asked for Category 1? Tell us the vehicle and we’ll point you at the right route, full system or upgrade.
- Speak to us about meeting a Category 1 condition
- S-Series alarms including the Category 1 S30
Frequently Asked Questions
What is the difference between a Category 1 and Category 2 alarm?
Category 2 isn’t an alarm at all. It’s an electronic immobiliser on its own. Category 1 combines an immobiliser with a full alarm, including intrusion sensors, a siren and a back-up power supply, so it both stops the drive-away and draws attention.
Does my car already have a Thatcham Category 1 alarm?
Some cars leave the factory with one, many don’t. Check the handbook, the original sales paperwork or ask a franchised dealer. If the car has only a factory immobiliser, adding a Thatcham Category 2-1 alarm can bring it up to Category 1 status.
Is a Category 2-1 alarm as good as Category 1?
For insurance purposes, a Category 2-1 alarm fitted to a vehicle with a qualifying Category 2 immobiliser gives Category 1 status. The two together meet the same category, so it’s a recognised route rather than a lesser one.
Will a Category 1 alarm reduce my insurance?
It may. Some insurers reflect Thatcham approved security in the premium, others treat it as a condition without a discount. The effect depends on the insurer, the vehicle and the policy, so ask yours before you buy.
Who can fit a Thatcham Category 1 alarm?
Use a professional installer trained on the product, and keep the paperwork they give you. Some insurers ask for proof of installation. Check your policy wording in case it names a particular type of installer.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- Thatcham
- car alarms
- insurance
- S-Series
Ian D.
Head of R&D at Scorpion Automotive
Ian D. is Head of R&D at Scorpion Automotive in Chorley and writes about Thatcham, insurance and OEM engineering.
Reviewed by James M., Technical Director at Scorpion Automotive