Motorhome Alarms: Protecting the Cab and the Habitation Area
By Mike B. Reviewed byJames M.
A motorhome alarm has to protect two spaces: the cab you drive from and the habitation area you live in. The best motorhome alarms combine perimeter and interior protection for the cab with extra sensors for the habitation area and lockers, and a Thatcham-approved system is what most insurers look for.
Key facts:
- Two zones: the cab behaves like a van, the habitation area like a small home.
- Thatcham 2 to 1 upgrade alarms add alarm cover to a factory immobiliser, which most modern motorhome bases already have.
- Wireless PIR sensors extend protection to the living area and lockers without long cable runs.
- S34 and S37 are the Scorpion S-Series (Sigma) alarms suitable for motorhomes.
- Tracking is the recovery layer for a stolen motorhome. An alarm doesn’t replace it.
What does a motorhome alarm need to protect?
A motorhome is a van base with a house on the back. That gives an alarm more to do than it would in a car.
The cab is the vehicle itself. Thieves who want the whole motorhome attack the cab doors, the ignition or the key. Perimeter protection on the cab doors and bonnet, plus ultrasonic interior protection, is the starting point.
The habitation area has its own door, windows, rooflights and often a garage. Thieves after the contents, or looking for the keys, may come in that way. Its space is large and often divided, which is why ultrasonic sensors built for a car cabin don’t always cover it.
Lockers and storage hold bikes, gas, tools and leisure kit. They’re easy to force and often overlooked.
A good motorhome alarm covers all three, and lets you arm parts of it while you’re sleeping inside.
Which Thatcham category does a motorhome alarm need?
Thatcham Research sets the categories UK insurers use. Our explainer on what Thatcham approval means covers them in full. For motorhomes, two matter most:
- Category 1 is an alarm and immobiliser combined.
- Category 2 to 1 upgrades an existing factory immobiliser to Category 1 standard by adding an approved alarm.
Most modern motorhome base vehicles leave the factory with an immobiliser. That makes a Category 2 to 1 upgrade alarm the usual choice, because it adds the alarm without replacing what’s already there. Always check your policy wording: some insurers specify a category, others ask for a tracker as well on higher-value vans. Our guide to motorhome insurance alarm requirements covers what insurers look for, and Sigma S34 vs S37 compares the two motorhome alarms model by model.
Which S-Series (Sigma) alarms suit motorhomes?
Many owners know Scorpion’s alarms by the Sigma name. Sigma S4, S30, S34 and S37 alarms are part of the same Scorpion S-Series alarms range, supported by our UK technical team.
| Model | Thatcham status | Motorhome fit | Habitation and locker cover |
|---|---|---|---|
| S34 | Category 2 to 1 upgrade, with additional radio keys | Suitable for motorhomes | Perimeter and ultrasonic interior |
| S37 | Category 2 to 1 CAN-Bus upgrade | Suitable for motorhomes | Built-in RF receiver for wireless PIR sensors in the habitation area and lockers |
| S30 | Category 1 alarm immobiliser | Check with us for your base vehicle | Perimeter and ultrasonic interior |
S34
The S34 is a Thatcham 2 to 1 upgrade alarm that comes with additional radio keys. It gives perimeter and ultrasonic interior protection and is listed as suitable for motorhomes.
S37
The S37 is the one most motorhome owners ask about. It’s a Thatcham 2 to 1 CAN-Bus upgrade alarm with a built-in RF receiver, so it accepts additional wireless PIR sensors for the habitation area and lockers. A 4-button remote control upgrade is available.
How do you protect the habitation area while you sleep?
This is where a motorhome alarm differs most from a car alarm. You want the doors and lockers protected at night, without the alarm going off every time someone turns over in bed.
The practical approach:
- Arm the perimeter so the cab, habitation door and lockers are protected.
- Leave interior sensors in the occupied area off, so movement inside doesn’t trigger the alarm.
- Keep sensors in empty spaces active, such as the garage or a locker, where any movement is suspicious.
Wireless PIR sensors make zoning easier because each one covers a defined area and needs no cable through the furniture. Ask your installer how your chosen system handles night arming before it’s fitted.
Alarm, immobiliser and tracker: what a motorhome needs
An alarm makes noise. It doesn’t stop a determined thief who has the key, and it doesn’t help find a motorhome that’s been taken.
For higher-value motorhomes, the usual combination is:
- An alarm with cab and habitation cover.
- An immobiliser, factory or aftermarket, that a cloned key can’t start.
- A Thatcham-approved tracker with 24/7 monitoring, such as ScorpionTrack’s motorhome tracking.
The layered approach in our van security guide applies to motorhomes too, because most are built on van bases.
Motorhomes sit in storage sites and ferry queues for long stretches, and a stolen one can end up in a barn or container. A VHF+ beacon beside your tracker gives searchers a closing signal. It’s in pre-launch.
The wider question of layer order across other vehicle types is set out in which vehicle security you need.
Talk to us about a motorhome alarm
Tell us the base vehicle, the layout and what your insurer asks for, and we’ll recommend the right S-Series alarm.
- Speak to us about a motorhome alarm
- S-Series alarms including the S34 and S37
Frequently Asked Questions
What is the best alarm for a motorhome?
The best motorhome alarm protects both the cab and the habitation area and meets your insurer’s Thatcham requirement. For most modern bases, a Thatcham 2 to 1 upgrade alarm such as the Scorpion S37, with wireless PIR sensors for the living area and lockers, is a strong choice.
Is a Sigma motorhome alarm made by Scorpion?
Yes. Sigma is a Scorpion Automotive brand, and Sigma S-Series alarms such as the S34 and S37 are part of the Scorpion S-Series range. Our UK technical team supports them, including manuals, remotes and spares.
Do motorhome insurers require a Thatcham alarm?
Many do, especially on higher-value motorhomes, and some also ask for a Thatcham-approved tracker. Requirements vary by insurer and policy, so check the wording before you choose a system.
Can a motorhome alarm protect the habitation area?
Yes, if it supports extra sensors. The S37 has a built-in RF receiver for wireless PIR sensors, so it can protect the habitation area and lockers as well as the cab.
Can I sleep in my motorhome with the alarm on?
With the right setup, yes. Arm the perimeter so doors and lockers are protected, and leave interior sensors in the occupied space switched off. Ask your installer how your system handles night arming.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- motorhome security
- S-Series
- Sigma
- alarms
Mike B.
Software Engineer at Scorpion Automotive
Mike B. is a Software Engineer at Scorpion Automotive in Chorley. Vehicle security, immobilisers and keyless theft are the areas Mike covers.
Reviewed by James M., Technical Director at Scorpion Automotive