Skip to main content
English
OEM and Engineering

How Manufacturers Specify Dealer-Fit Security Accessories

5 min read

By Ian D. Reviewed byJames M.

How Manufacturers Specify Dealer-Fit Security Accessories: Scorpion Automotive guide illustration with an electronics module icon

Dealer fit accessories are parts a vehicle maker approves for its franchised dealers to fit, and for security products the maker’s specification decides almost everything: the approvals, the harness, the fitting method and the paperwork. A product only becomes a genuine accessory once it meets that specification and the maker signs it off.

Key facts:

  • The vehicle maker owns the specification. The supplier designs and builds to it.
  • EMC approval matters: under UN R10, alarms, immobilisers and devices on the data bus fall within immunity-related functions.
  • Alarm and immobiliser rules come from UN R116, which also includes a model installation certificate.
  • Fitting method is part of the spec, usually a vehicle-specific harness with no cutting into the factory loom.
  • Quality and material data, such as automotive quality management and IMDS, are expected alongside the product.

What are dealer-fit accessories?

They’re the genuine accessory route. The franchised dealer fits an approved product before handover or later in the vehicle’s life, and the part is sold through the maker’s own parts system.

That sits between two other routes: line-fit at the factory, and fitment at the port of entry when vehicles arrive in a market. Our guide to OE vs aftermarket vehicle security compares all of them.

For security, dealer-fit has one big advantage. The maker can offer a product matched to each model without changing the production line, and the buyer gets a part backed by the brand on the bonnet.

What does a manufacturer’s specification cover?

Specifications differ between makers, but security accessories tend to be judged on the same areas.

  1. Vehicle fit: which models, years and trims the product covers, and how it connects.
  2. Approvals: evidence for electromagnetic compatibility and, for alarms and immobilisers, the relevant anti-theft regulation.
  3. Function: exactly what the product does, how it arms and disarms, and how it behaves with the vehicle’s own systems.
  4. Installation: fitting instructions, time allowed, tools and training for dealer technicians.
  5. Quality: the supplier’s quality system, production controls and defect targets.
  6. Data: material declarations and the documentation needed for the maker’s own records.
  7. Supply and aftersales: part numbers, packaging, lead times, spares and warranty handling.

Miss one, and the product doesn’t reach the parts catalogue.

Which approvals does a dealer-fit security product need?

Two UN regulations come up most often.

UN R10 for electromagnetic compatibility. R10 lets aftermarket parts that aren’t related to immunity-related functions rely on a manufacturer’s declaration instead of type approval. Its list of immunity-related functions includes engine control, acoustic warnings such as the anti-theft alarm, and vehicle data bus functionality (UN Regulation No 10). Security products tend to sit inside that list, so makers usually expect an approval.

UN R116 for alarms and immobilisers. R116 sets requirements for vehicle alarm systems and immobilisers, from siren duration to how an immobiliser disables the vehicle, and includes a model installation certificate for the fitter to complete (R116, OJ L 45).

In the UK, insurers may also look for a Thatcham category, which is a separate certification. A specification will say which ones the maker wants for each market.

How should a dealer-fit accessory connect to the vehicle?

Without harming it. That’s the short version of most makers’ fitting requirements.

Spec areaWhat the maker usually wantsWhy
HarnessVehicle-specific, plug-in where possibleNo cutting or splicing of the factory loom
Network connectionReads the vehicle’s data without disturbing itProtects other systems and warranty
MountingDefined location and fixingsRepeatable fit across dealers
InstructionsStep by step, model by modelConsistent quality at every dealer

Plug-in harnesses also make removal clean at the end of a lease. For the installer’s view, see fitting accessories without cutting the loom.

What quality evidence do makers expect?

Makers expect a supplier to work like an automotive supplier, not a gadget importer.

  • Quality management: automotive quality systems such as IATF 16949 set the expectation for process control and continual improvement.
  • Defect targets: many programmes set parts-per-million targets for delivered quality.
  • Material data: declarations through IMDS, the automotive industry’s material data system.
  • Traceability: the ability to trace a part back through production if a question arises.

Scorpion in the dealer-fit channel

Scorpion supplies vehicle makers through OE line-fit, port of entry fitment and genuine parts, as well as the aftermarket. Every electronic component is IMDS compliant, and parts supplied to DAF Trucks have met or exceeded the PACCAR 10PPM quality requirement. Toyota (GB) PLC has described Scorpion’s service as “outstanding” in terms of product development, supply and product reliability.

Because design, firmware and manufacturing happen in-house in Chorley, our OEM and bespoke team can build a variant to a maker’s specification, including harnesses and documentation. For franchised dealers adding security to their own sales, see dealer vehicle security products.

Talk to us about dealer-fit approvals

Building a genuine accessory programme, or reviewing an existing one? Talk to our OE team.

Frequently Asked Questions

What is a dealer-fit accessory?

A dealer-fit accessory is a product the vehicle maker approves for its franchised dealers to fit, before handover or later in the vehicle’s life. It’s sold through the maker’s parts system and backed by the maker as a genuine accessory.

Do dealer-fit alarms need type approval?

Usually, yes. Under UN R10, devices related to immunity-related functions, a list that includes the anti-theft alarm and the vehicle data bus, need type approval rather than a declaration. Alarms and immobilisers can also be approved under UN R116.

What is the difference between dealer-fit and line-fit?

Line-fit happens on the factory production line. Dealer-fit happens at the franchised dealer after the vehicle is built, using an approved accessory and the maker’s fitting instructions. Port of entry fitment, when vehicles arrive in a market, sits between the two.

Why do vehicle makers insist on plug-in harnesses?

A plug-in harness avoids cutting or splicing the factory loom, which protects the vehicle’s own systems and keeps fitting consistent across every dealer. It also makes removal cleaner if the vehicle is returned at the end of a lease.

What is IMDS?

IMDS is the International Material Data System, which the automotive industry uses to record the materials in each part. Vehicle makers use it to meet recycling and substance rules, so suppliers of genuine accessories are expected to provide IMDS data for their products.

Speak to our team

Dealers, installers and OEM partners get trade pricing, product training and a named account manager. Tell us what you need.

View all products →
Tags:
  • OEM
  • dealer-fit
  • genuine accessories
  • vehicle security
Scorpion Automotive

Ian D.

Head of R&D at Scorpion Automotive

Ian D. is Head of R&D at Scorpion Automotive in Chorley and writes about Thatcham, insurance and OEM engineering.

Reviewed by James M., Technical Director at Scorpion Automotive