What Is a Plip Upgrade Alarm? Using Your Original Remote
By Mike B. Reviewed byJames M.
A plip upgrade alarm is an aftermarket car alarm that arms and disarms with your car’s original remote. “Plip” is the trade name for the remote locking fob. Lock the car as normal and the alarm sets with it. Open the car and it switches off. There’s no second fob to carry.
Key facts:
- One fob: the car’s own remote controls the alarm.
- Upgrade, not replacement: the alarm adds to the car’s existing security.
- Thatcham 2-1: approved plip upgrades add alarm cover to a car with a Category 2 immobiliser.
- Same protection as other alarms: perimeter switches and ultrasonic interior sensing.
- Limit: because it trusts the car’s locking, it shares that locking’s weaknesses.
How does a plip upgrade alarm work?
A plip upgrade alarm watches the car’s own locking system. When the factory remote locks the car, the alarm sees that and arms. When the remote opens the car, the alarm disarms.
In practice:
- You press lock on the car’s original key.
- The car locks, and the alarm reads that event.
- The alarm arms, and its LED starts flashing.
- If a door, the bonnet or the cabin is disturbed, the siren sounds.
- You press open, and the alarm disarms with the car.
Older vehicles pass locking information along dedicated wires. Many newer ones send it as messages on the vehicle’s data network, which is why some upgrade alarms are built as CAN bus upgrades. Either way, the principle is the same. The alarm follows the car.
What’s the difference between a plip upgrade and a remote alarm?
The difference is who holds the remote.
| Plip upgrade alarm | Remote alarm | |
|---|---|---|
| Arms with | The car’s original remote | The alarm’s own remote |
| Fobs on the keyring | One | Two, or a combined arrangement |
| Works without a factory remote | No | Yes |
| Typical Thatcham rating | Category 2-1 | Category 1 when combined with an immobiliser |
| Override | Varies by model | Often a keypad or code |
A remote alarm suits older cars without usable factory remote locking, or owners who want the alarm controlled separately. Scorpion’s S30, a Thatcham Category 1 remote alarm immobiliser, is an example. Our Sigma S30 alarm guide covers how that type works.
A plip upgrade suits most modern cars, where the factory remote is already the way the car gets locked.
What Thatcham category is a plip upgrade alarm?
Approved plip upgrades are usually Category 2-1. That category applies where an aftermarket alarm has been added to a car that already has a Category 2 immobiliser (Motoring Research).
Most modern cars already carry a factory immobiliser. The plip upgrade adds the alarm half, and together they reach the combined standard. If your insurer asks for Category 1 on a car with a qualifying factory immobiliser, a 2-1 plip upgrade may be the simpler route. Check the policy wording first. Our explainer on Thatcham Category 1 vs Category 2 helps translate what insurers mean.
Not every plip upgrade is approved. A non-Thatcham upgrade still alarms the car. It just won’t meet a policy condition that names a category.
What are the pros and cons of a plip upgrade alarm?
Pros:
- Nothing new to remember. You lock the car the way you always have.
- One fob. No second remote to lose or replace.
- Tidy fit. The alarm works with the car rather than alongside it.
- Thatcham options. Approved 2-1 models are available.
Cons:
- Shares the factory remote’s weaknesses. If a thief can open the car as the owner would, the alarm sees what looks like normal use.
- Needs suitable factory locking. Cars without remote central locking need a remote alarm instead.
That first point matters most on keyless cars. A relay attack makes the car believe its key is nearby, so the doors open as though the owner had arrived. A plip upgrade alarm can’t tell the difference. On a keyless car, pair the alarm with an immobiliser that needs a PIN or tag a relay can’t supply. The car alarm and immobiliser buyer’s guide sets out how to combine the two.
Which Scorpion alarms are plip upgrades?
Scorpion’s S-Series alarms, also known as Sigma, include several upgrade alarms.
- S12: non-Thatcham OEM remote upgrade alarm using the original equipment radio keys.
- S32: Thatcham Category 2-1 plip upgrade alarm using the original vehicle remotes.
- S34: Thatcham Category 2-1 plip upgrade alarm with additional radio remotes, suitable for motorhomes.
- S37: Thatcham Category 2-1 CAN bus upgrade alarm with a built-in RF receiver for wireless PIR sensors.
Each one gives perimeter and ultrasonic interior protection.
Talk to us about a plip upgrade alarm
Want to keep using your car’s own remote with a Thatcham alarm? Tell us the vehicle and what your insurer asks for.
- Speak to us about plip upgrade alarms
- S-Series alarms to compare models
Frequently Asked Questions
What does plip mean on a car alarm?
Plip is the trade name for a car’s remote locking fob. A plip upgrade alarm is an aftermarket alarm that arms and disarms when you use that original fob, so you don’t need a separate alarm remote.
Is a plip upgrade alarm Thatcham approved?
Some are. Approved plip upgrades are usually Thatcham Category 2-1, meaning they add an alarm to a car that already has a Category 2 immobiliser. Scorpion’s S32, S34 and S37 are Category 2-1. The S12 is non-Thatcham.
Will a plip upgrade alarm stop keyless theft?
Not on its own. It follows the car’s locking, so if a relay attack opens the car as though the real key were present, the alarm sees normal use. Pair it with a PIN or tag immobiliser on a keyless car.
Can I fit a plip upgrade alarm to an older car?
Only if the car has suitable remote central locking for the alarm to follow. Older cars without it are better suited to a remote alarm with its own fobs, such as a Category 1 alarm immobiliser.
Do I still need my car’s immobiliser with a plip upgrade?
Yes. A Category 2-1 plip upgrade relies on the car’s Category 2 immobiliser to reach the combined standard. The alarm adds detection and the siren. The immobiliser stops the engine.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- car alarms
- plip upgrade
- S-Series
- Thatcham
Mike B.
Software Engineer at Scorpion Automotive
Mike B. is a Software Engineer at Scorpion Automotive in Chorley. Vehicle security, immobilisers and keyless theft are the areas Mike covers.
Reviewed by James M., Technical Director at Scorpion Automotive