Skip to main content
English
OEM and Engineering

ISO 9001 vs IATF 16949: The Difference for Vehicle Electronics

5 min read

By Ian D. Reviewed byJames M.

ISO 9001 vs IATF 16949: The Difference for Vehicle Electronics: Scorpion Automotive guide illustration with an electronics module icon

The difference between ISO 9001 and IATF 16949 is scope: ISO 9001 is a general quality management standard for any organisation, while IATF 16949 adds the automotive industry’s own requirements on top of it. For a vehicle electronics supplier, ISO 9001 is the foundation and IATF 16949 is what vehicle manufacturers expect on their production lines.

The difference in brief:

  • ISO 9001: any sector, published by ISO, current edition ISO 9001:2015.
  • IATF 16949: automotive only, published by the International Automotive Task Force.
  • Relationship: IATF 16949 is built on the ISO 9001 framework and kept aligned with it.
  • What IATF adds: customer-specific requirements, defect prevention, product safety and traceability.
  • Who asks for which: general buyers accept ISO 9001; vehicle makers look for IATF discipline.

What is ISO 9001?

ISO 9001 sets the requirements for a quality management system that any organisation can use, from a software house to a foundry. The current edition at the time of writing, ISO 9001:2015, is the fifth edition and was published in September 2015.

Its core ideas are simple. Understand what customers need. Plan the work to deliver it. Control the processes. Measure the results. Improve.

Because it’s sector-neutral, ISO 9001 says little about how a part should be validated before production, how to handle a safety-critical component or how to meet one vehicle maker’s rules versus another’s.

What does IATF 16949 add for vehicle electronics?

IATF 16949 takes the ISO 9001 framework and adds what the automotive supply chain needs. The IATF describes its 2016 edition as having a “strong orientation to the customer, with inclusion of a number of consolidated previous customer specific requirements” (IATF).

For an electronics supplier, the additions show up in day-to-day work:

  1. Customer-specific requirements from each vehicle maker, built into the system.
  2. Planning before production, so a new product is validated before parts ship.
  3. Defect prevention through risk analysis of the design and the process.
  4. Product safety handling for parts that affect how the vehicle behaves.
  5. Traceability of components and batches through to the finished part.
  6. Control of sub-suppliers, including the component makers behind a circuit board.

Our guide to IATF 16949 explained covers the standard’s history and themes in more depth.

ISO 9001 vs IATF 16949 side by side

ISO 9001IATF 16949
ScopeAny organisation, any sectorAutomotive supply chain
Published byISOInternational Automotive Task Force
Builds onStands aloneThe ISO 9001 framework
Customer requirementsGeneralVehicle makers’ specific requirements
Product developmentGeneral design controlStructured planning and validation before production
Quality measureDefined by the organisationOften defect rates in parts per million
Typical buyerAny customerVehicle manufacturers and their direct suppliers

Why do vehicle electronics need the automotive layer?

Electronics in a vehicle live a hard life. They see heat, cold, vibration, damp and electrical noise for years. They also connect to systems that matter: a security module may sit on the same CAN network as the engine management.

That’s why vehicle makers want more than general quality control. They want to know a supplier has thought through how a design could fail, tested it before production and can trace any problem to its cause. Products that interact with the vehicle network, such as our CAN bus interfaces, show why that discipline matters.

Which standard does a supplier need?

It depends on who buys the product.

  • Selling into general industry or retail: ISO 9001 is the usual baseline.
  • Supplying vehicle makers’ production lines: buyers look for IATF 16949 discipline and their own customer-specific requirements.
  • Selling aftermarket products: neither is a legal requirement, but automotive quality habits show in fit, reliability and support.

Ask a supplier which standard they work to and how their OE customers measure them. The second answer is often the more telling.

How Scorpion applies IATF 16949

Scorpion designs and manufactures vehicle security and telematics in the UK, with R&D, firmware and production in-house since 1973. The company is IATF 16949 certified and operates automotive quality management with processes built for OE supply. All electronic components are IMDS compliant.

That discipline is measured by customers. DAF Trucks has stated that parts supplied by Scorpion consistently meet or exceed the PACCAR 10PPM quality performance requirement. See why Scorpion for the background and OEM and bespoke for how programmes run.

Talk to us about OE quality requirements

Specifying electronics for a vehicle programme?

Frequently Asked Questions

What is the main difference between ISO 9001 and IATF 16949?

ISO 9001 is a general quality management standard for any organisation. IATF 16949 is the automotive standard built on the ISO 9001 framework, adding vehicle makers’ specific requirements, defect prevention, product safety and traceability.

Does IATF 16949 replace ISO 9001?

No. IATF 16949 is built on the ISO 9001 framework and the IATF keeps it aligned with ISO 9001. It replaced the earlier automotive standard, ISO/TS 16949:2009, not ISO 9001 itself.

Which version of ISO 9001 is current?

At the time of writing, the current edition is ISO 9001:2015, the fifth edition, published in September 2015. Check ISO’s own listing for any later revision.

Do aftermarket vehicle electronics need IATF 16949?

There’s no legal requirement for aftermarket products to come from an IATF 16949 supplier. Automotive quality habits still matter, because they show in how well a product fits, how rarely it fails and how long it’s supported.

What quality standard does Scorpion work to?

Scorpion operates automotive quality management with IATF 16949 certification and processes built for OE supply. All electronic components are IMDS compliant, and DAF Trucks has stated Scorpion meets or exceeds the PACCAR 10PPM requirement.

Speak to our team

Dealers, installers and OEM partners get trade pricing, product training and a named account manager. Tell us what you need.

View all products →
Tags:
  • OEM
  • quality
  • standards
  • vehicle electronics
Scorpion Automotive

Ian D.

Head of R&D at Scorpion Automotive

Ian D. is Head of R&D at Scorpion Automotive in Chorley and writes about Thatcham, insurance and OEM engineering.

Reviewed by James M., Technical Director at Scorpion Automotive