Insurer Requires a Thatcham Alarm on My Van: What to Do Next
By Ian D. Reviewed byJames M.
If your insurer requires a Thatcham alarm on your van, start with the exact wording of the condition: the category, the deadline and any proof required. Then fit a product certified to that category, have it professionally installed, and send the certificate of installation. Most conditions name Category 1, which a full system or a 2-1 upgrade can meet.
What to do, in order:
- Read the condition: category, deadline, proof.
- Check the van: does it already have a qualifying immobiliser?
- Pick the product: certified to the category named.
- Book a trained installer: and confirm they’ll issue proof of fitting.
- Send the paperwork: before the deadline, and keep a copy.
Why has my insurer asked for a Thatcham alarm?
Vans carry two risks at once: the vehicle and what’s inside it. Tools and stock make them attractive, and insurers price that in. Across all vehicle types, the ABI reported that the average claim for theft of and from a vehicle reached £11.2k in the last quarter of 2024 (ABI).
A Thatcham category gives the insurer a tested standard to point to. Thatcham Security Certification covers light commercial vehicles as well as cars (Thatcham Research), so the same category numbers apply to your van.
How do I read the insurer’s condition?
Pull out the schedule or endorsement and look for four details.
- The category. “Thatcham Category 1” is the most common for alarms. Some conditions accept Category 2 for an immobiliser only, or ask for an S5 or S7 tracker.
- The deadline. Some insurers give a number of days from the start of cover. Diary it.
- The proof. A certificate of installation, a photo, or an installer’s letter. Check which.
- The consequence. Some conditions say theft cover doesn’t apply until the device is fitted. Read that line twice.
If anything is unclear, ask the insurer or broker to confirm in writing. A two-line email now saves an argument after a claim.
Which Thatcham alarm suits a van?
That depends on the van’s existing security and how you use it.
| Your van | What meets a Category 1 condition | Scorpion option |
|---|---|---|
| Has a qualifying factory Category 2 immobiliser, you want to keep one key | Category 2-1 upgrade using the original remote | S32 |
| Needs separate remotes, or lacks suitable remote locking | Category 2-1 upgrade with additional radio keys | S34 |
| CAN bus van, extra sensors wanted | Category 2-1 CAN bus upgrade with wireless sensor support | S37 |
| No qualifying immobiliser | Complete Category 1 alarm immobiliser | S30 |
All four are in the S-Series alarms range. The installer should confirm the van’s immobiliser qualifies before fitting a 2-1 upgrade.
What about the load area?
A Category 1 alarm protects the vehicle and raises the alarm on intrusion. Many van owners also want the doors themselves harder to open, especially on multi-drop work where doors open dozens of times a day.
That’s where FleetLock comes in. It’s an LCV multipoint locking system with anti-scan touch keys, auto-locking doors and an independent keypad immobiliser that works separately from the van’s own computer, so it resists theft through the diagnostic port. The van immobilises 10 seconds after the ignition is switched off and needs a 4 digit PIN to drive.
FleetLock comes in Lite, Plus and Pro. Pro adds 24/7/365 monitoring centre support and is listed as insurance approved on the product page. If your condition names an alarm category specifically, check with the insurer whether FleetLock alone satisfies it or whether you need an alarm as well.
Who should fit it?
A trained installer, who can issue the proof your insurer wants. When Thatcham set up its Recognised Installer scheme in 2010, it described proof of equipment installation as an imperative requirement for insurers (The Auto Channel). Ask your installer what proof they provide today.
Scorpion trains and accredits installers through its approved installer programme. We don’t run a public fitter listing or refer customers to fitters, so ask the seller of your product who fits it, or read how to choose an installer.
What if I run more than one van?
Treat it as a fleet decision rather than van by van.
- Fit the same category across vehicles, so one condition covers all.
- Keep certificates in one place, with registration numbers.
- Check the fleet policy for different conditions on different vehicle values.
- Consider tracking: fleet insurers often ask for it alongside an alarm.
Our guide to the insurance approved car alarm explains how security conditions are worded, and it applies to vans too.
Send us your van insurer’s wording
Got a deadline on a van condition? Send us the wording and the van details, and we’ll tell you what meets it.
- Speak to us about your insurer’s requirement
- FleetLock for van locking and immobilisation
Frequently Asked Questions
What happens if I don’t fit the Thatcham alarm my insurer requires?
Check the condition wording. Some state that theft cover won’t apply until the specified device is fitted and working. That can leave the van uninsured for theft, so fit it before the deadline or speak to the insurer straight away.
Which Thatcham category does a van insurer usually ask for?
Category 1 is the most common alarm requirement, meaning an alarm plus an immobiliser. A Category 2-1 upgrade on a van with a qualifying Category 2 immobiliser also meets it. Some insurers ask for an S5 or S7 tracker instead or as well.
Does my van already have a Thatcham alarm?
Some vans leave the factory with Thatcham-assessed security, many don’t have a factory alarm at all. Check the handbook or ask a franchised dealer. An installer can also confirm whether the factory immobiliser qualifies as a Category 2 base.
How long does my insurer give me to fit the alarm?
It varies by insurer and is written into the condition or endorsement. Some give a set number of days from the start of cover. If no deadline is stated, ask the insurer and get the answer in writing.
Is FleetLock a Thatcham alarm?
FleetLock is a van locking and immobilisation system with telematics, not a Category 1 alarm. FleetLock Pro is listed as insurance approved on the product page. If your insurer names an alarm category, confirm whether you need a Thatcham alarm alongside it.
Speak to our team
Questions about vehicle security, tracking or fleet telematics? Our UK team will point you to the right product for your vehicle or fleet.
Related Products
View all products →- vans
- Thatcham
- insurance
- FleetLock
- VHF+
Ian D.
Head of R&D at Scorpion Automotive
Ian D. is Head of R&D at Scorpion Automotive in Chorley and writes about Thatcham, insurance and OEM engineering.
Reviewed by James M., Technical Director at Scorpion Automotive