Skip to main content
English
Theft Trends and Data

Old LoJack Unit in Your Car? What a VLU Is and What to Do

6 min read

By Morgan P. Reviewed byJames M.

Old LoJack Unit in Your Car? What a VLU Is and What to Do: Scorpion Automotive guide illustration with a VHF radio mast icon

To remove an old LoJack, first confirm what’s fitted, then have a qualified auto electrician find and disconnect it.

A legacy LoJack VHF unit, often called a VLU, is hidden and wired into the car. In the US, since LoJack discontinued its radio system on 26 March 2026, nothing is listening for a legacy unit. Elsewhere, ask LoJack which network your unit uses.

Key facts:

  • A VLU is a radio transponder. LoJack described it as “a VHF transponder with a hidden antenna, microprocessor and power supply”.
  • In the US the network behind it has gone. LoJack’s legacy US RF system was discontinued effective 26 March 2026.
  • LoJack GPS is different. Newer LoJack products report over the cellular network and weren’t part of the switch-off.
  • It’s hidden on purpose. Covert fitting made it harder for thieves to find, and it makes removal harder too.
  • Don’t cut wires blind. A careless removal can leave live or damaged wiring behind.

What is a LoJack VLU?

VLU stands for vehicle location unit. It’s the small radio transmitter at the heart of the original LoJack system. LoJack’s 2015 annual report described “the LoJack Unit” as the component installed in the consumer’s vehicle, made up of “a VHF transponder with a hidden antenna, microprocessor and power supply” (LoJack 10-K).

The unit stayed silent until a theft was reported. Then, in LoJack’s words, “a unique radio signal is automatically transmitted to the LoJack Unit in the stolen vehicle, activating its tracking signal”, and police cars fitted with tracking computers homed in on it.

The filing also said covert installation “decreases the chance of discovery”. That’s why there’s no standard location. Each installer chose a hiding place.

Does an old LoJack still do anything?

Not for recovery in the US. LoJack’s own notice says that “effective March 26, 2026, the legacy LoJack RF system was discontinued”, with no new RF activations and officers advised to disconnect the LoJack display head in their cars (LoJack). We covered the background in LoJack’s US VHF switch-off and Scorpion VHF+.

So a VLU in a US car has no network to wake it up and no police receivers to hear it. It’s a component with nothing to connect to.

Outside the US the notice does not apply. LoJack International still sells radio-based products in some countries, so ask LoJack which network your unit uses before assuming it is dormant.

A LoJack GPS product is a different thing. It sends position over the cellular network and has its own app and plan. If you’re unsure which you have, ask before removing anything.

How do you know if your car has LoJack?

Start with paperwork, not panels.

  1. Check the purchase documents. Dealer-fitted LoJack usually appears as a line item on the bill of sale or finance contract.
  2. Look for stickers or window etching that mention LoJack, often added at the dealer.
  3. Contact LoJack with your VIN and ask what’s registered to the vehicle and which system it is.
  4. Ask the selling dealer whether they fitted it and where.

It’s worth checking even if you think you paid for it. Separately from LoJack itself, the US Federal Trade Commission has brought a case against a dealer group over add-ons. In 2024 it alleged that Leader Automotive Group, a Chicago-area dealer group, charged one customer for LoJack that was never installed and that another couldn’t activate theirs (FTC). The case was against the dealer group, not LoJack, those are the FTC’s allegations, and the dealer group settled.

How to remove an old LoJack safely

Treat it as a wiring job, not a quick pull.

StepWhy it matters
Confirm it’s a legacy VHF unitYou don’t want to remove a working GPS tracker by mistake
Use a qualified auto electricianThey can trace the power feed and close it off properly
Find the installer’s record if you canSome dealers noted the fitting location
Insulate or remove the power feedLoose live wires are a fault and fire risk
Check the car afterwardsMake sure nothing else was disturbed behind the trim

Don’t go cutting wires behind the dashboard looking for it. The unit is meant to blend in, and the wiring around it may belong to the car’s own systems.

If you’d rather leave it in place, that’s your choice. In the US it won’t help recover the car any more, so don’t rely on it, and ask LoJack before paying for a service that depended on the old network.

What should you use instead?

If you want stolen vehicle protection now, look at monitored GPS and cellular tracking. It gives a live position, alerts and journey history across the whole country, and doesn’t depend on radio receivers in police cars. Read how tracking and monitoring works for what a monitored service does after a theft.

Questions worth asking any provider:

  • Is it monitored 24/7, and by whom?
  • Does it alert on jamming and battery disconnection?
  • Is there an immobilisation option?
  • What happens to the plan if you sell the car?

Our Scorpion vs LoJack page lays out the differences in what each company publishes.

Where Scorpion VHF+ stands

Scorpion VHF+ pairs a radio beacon with any GPS tracker. It is in pre-launch in the UK under Ofcom licence 1419997/1. A US service would need FCC authorisation and certified equipment first, as the VHF+ USA page explains.

Talk to us about tracking and recovery

If you run a dealer group, fleet or tracking business and have questions about vehicle recovery, get in touch.

Frequently Asked Questions

How do I remove an old LoJack unit?

Confirm first that it’s a legacy VHF unit rather than a working LoJack GPS product. Then have a qualified auto electrician trace its power feed, disconnect it and close off the wiring properly. The unit was hidden on purpose, so don’t strip trim or cut wires looking for it.

What is a LoJack VLU?

A VLU, or vehicle location unit, is the hidden radio transmitter used by LoJack’s original system. LoJack described it as a VHF transponder with a hidden antenna, microprocessor and power supply. It stayed silent until a reported theft activated it, so police receivers could home in.

Does an old LoJack still work?

Not for recovery in the US. LoJack discontinued its legacy RF system effective 26 March 2026, so there’s no network to activate a VLU and no police receivers listening for it. LoJack’s GPS products are separate and report over the cellular network. Outside the US, ask LoJack which network your unit uses.

Is it worth removing an old LoJack?

It’s optional. In the US the unit no longer helps recover the vehicle, so removing it mainly tidies the wiring and avoids confusion for a future buyer. If you do remove it, use a qualified installer so no damaged or live wiring is left behind.

How can I tell if my car has LoJack?

Check your bill of sale or finance paperwork for a LoJack line item, look for LoJack stickers or etching, and contact LoJack with your VIN. The dealer that sold the car may also have a record of fitting it and where it was placed.

Where does Scorpion VHF+ stand?

Scorpion VHF+ is a UK project in pre-launch under Ofcom licence 1419997/1. It is separate from LoJack equipment; the VHF+ page has the current status.

Speak to our team

Want tracking backed by a recovery team that works 24/7 with UK police? Speak to us about the right system for your vehicles.

View all products →
Tags:
  • LoJack
  • USA
  • stolen vehicle recovery
  • VHF
Scorpion Automotive

Morgan P.

Head of Tracking Support at Scorpion Automotive

As Head of Tracking Support at Scorpion Automotive in Chorley, Morgan P. writes about Scorpion VHF+, stolen vehicle tracking, theft data and international markets.

Reviewed by James M., Technical Director at Scorpion Automotive